Technician’s Brake Lubricant – High-Temperature Synthetic Formula

The pro-grade brake lubricant that ends squeal and frozen hardware

Squeaky pads, corroded slide pins, and seized abutment clips waste hours and ruin customer confidence. One paper-thin coat of our Technician’s Brake Lubricant turns every brake job into a quiet, come-back-free service. This synthetic, non-melting grease clings at rotor-red temperatures yet stays pliable through lake-effect winters, so calipers glide smoothly and pads wear evenly—mile after mile.

Why you need a dedicated brake lubricant (not chassis grease)

Generic lithium or moly greases melt around 500 °F and can conduct current through ABS sensors. Our brake-specific compound:

• Survives -50 °F → 2,800 °F — no run-off, no scorching.

• 100 % non-conductive — safe for ABS/ESC wheel-speed pickups.

• Rubber-boot friendly — will not swell EPDM or phenolic pistons.

• Wash-off resistant — beads off de-icer brine and acidic wheel cleaners.

Result: silent stops today and bolts that back out by hand at the next pad swap.

What’s in the 4 oz brush-top jar?

• 4 oz (118 mL) of dark-gray, ceramic-reinforced brake lubricant.

• Built-in natural-bristle brush for zero-mess application.
  

Five ways it makes every brake job better

1. Silences pad squeal — fills micro-gaps and damps vibration without sticky shims.

2. Prevents corrosion — seals out salt, humidity, and galvanic reactions on aluminum calipers.

3. Reduces service time — guide pins slide freely; hardware clips pop out cleanly next visit.

4. Extends pad & rotor life — even clamping force means uniform wear and cooler running.

5. Versatile compatibility — safe on steel, aluminum, stainless, EPDM, and nitrile.

Where (and where not) to use Technician’s Brake Lubricant

Tech tip: Combine with our rust-proof Brake Line Kits for a complete, long-life brake overhaul.

Three-step pro application (under two minutes per wheel)

1. Prep — wire-brush away rust and old grease; blast clean with brake cleaner.

2. Brush-on — dip the built-in applicator and lay on a paper-thin, uniform coat.

3. Assemble — reinstall pads, pins, and clips; torque bolts to factory spec.

Quiet stops—guaranteed.

Technical specifications

• Need thread protection? Grab our Industrial Anti-Seize Lubricant (2,200 °F).

• Seal ABS connectors with Dielectric Grease while the wheels are off.

These context-rich anchors reinforce relevancy for “brake lubricant” and guide shoppers to complementary consumables.

The 4LifetimeLines™ difference

• Made in the USA under ISO-certified QA.

• Lifetime satisfaction guarantee—if squeal or seizure returns, we replace or refund.

• Same-day shipping from our US warehouse on weekday orders placed before 2 p.m. EST.

Ready for whisper-quiet brakes and hassle-free hardware?

Add our Technician’s Brake Lubricant to your cart now and give every brake job the professional edge it deserves.