1/4" × 131" Copper-Nickel Brake Line – Pre-Flared, Ready to Install

Product Description

Stop fighting rusty steel tubing and specialty flaring tools. This 1/4-inch-diameter, 131-inch RightQuick copper nickel brake line arrives double-flared with 7/16-24 and 1/2-20 inverted-flare fittings already threaded on, so swapping corroded lines becomes a fast cut-to-fit job instead of an afternoon in the vise.

Drawn from a 90-10 copper–nickel alloy, the tube blends copper’s natural flexibility with nickel’s ability to shrug off salt, moisture, and road chemicals for years longer than OEM steel. It also dissipates heat quickly during repeated hard stops and is manufactured to exceed SAE J1047 and FMVSS 106 burst-pressure and whip standards, giving you true OEM-grade safety.

At 131 inches, this length bridges master-to-ABS modules, frame-to-axle runs, or custom street-rod plumbing with room to trim for a perfect fit. Because the fittings are pre-installed, you simply route the line, make any final cut if needed, slide the nut back, and torque to spec—no expensive flaring kit required.

Copper nickel bends up to sixty-five percent easier than steel, turning tight chassis curves into a one-person task. The nickel content blocks galvanic reactions with stainless or aluminum components found in modern brake systems, protecting every union from hidden corrosion and seized fittings when it’s time for future service.

Like every 4LifetimeLines component, this copper nickel brake line is backed by a lifetime warranty, so you can install it once and drive with confidence.