Skip to content
Page overlay

Tools

Brake Line Tubing Benders

Pro-grade tools for clean flares and stubborn, rusted fittings.

Brake Line Tubing Benders

Collection is empty

Complete the job — you'll also want

Brake Line Tubing Benders

A kinked brake line restricts flow and has to be cut out and redone. A tubing bender supports the tube wall through the bend, so you get smooth, consistent curves that match the factory route and look professional.

Why use a bender

  • No kinks or flat spots: the tube stays round through the bend.
  • Repeatable angles: make matching bends on both sides of the vehicle.
  • Tighter bends: get around frame rails and suspension parts in tight spaces.
  • Works with harder tubing: steel and stainless are hard to bend cleanly by hand.

Choosing the right bender

Match the bender to your tubing size, most often 3/16" or 1/4" for brake lines. Copper-nickel can often be bent by hand for gentle curves, but a bender gives cleaner results on tight radii. Steel, PVF-coated and stainless tubing really need one. Check each product page for supported sizes.

Complete the job

Straighten coiled tubing first with a tubing straightener, bend, then flare the ends with a flaring tool. Shop brake and fuel line tubing.

From the Knowledge Garage