Skip to content
Page overlay

Brake Lines

PVF Coated Steel Brake Lines & Kits

Rust-proof lines that bend by hand and outlast the vehicle.

PVF Coated Steel Brake Lines & Kits

PVF-coated steel gives you the look and fit of a factory brake line with far better corrosion protection. A polyvinyl-fluoride coating over steel tubing resists salt, stone chips, and rust, making it a budget-friendly, OE-style replacement.

Showing 1 — 4 of 4 Products
Showing 1 — 4 of 4 Products
4LifetimeLines 5/16 in x 25 ft PVF-coated steel tubing coil (LTPC525)
Brake Line - Coil
4.9
Rated 4.9 out of 5 stars
7 Reviews
4LifetimeLines PVF-Coated Steel Brake Line Coil, 3/16" to 3/8", 25' or 50'
1/4"3/16"3/8"
Sale
1/4 Copper Nickel 12 ft Coil Flared & Fitted - 4LifetimeLines
Brake Line - Pre-Cut
5.0
Rated 5.0 out of 5 stars
3 Reviews
4LifetimeLines 12' Pre-Flared Brake Line Coil with Fittings, Copper-Nickel, PVF or Stainless, 3/16" or 1/4"
1/4"3/16"12'
4LifetimeLines PVF-coated steel brake line kit with fittings, 3/16" x 25' (LTPC325KIT)
Brake Line Kit
4.5
Rated 4.5 out of 5 stars
8 Reviews
4LifetimeLines PVF-Coated Steel Brake Line Kit with Fittings, 3/16", 1/4" or Both, 25' or 50', Optional Gravel Guard
1/4"3/16"25'

Complete the job — you'll also want

When to choose PVF-coated steel

Pick PVF when you want an original-equipment appearance at a lower price than copper-nickel or stainless, and you have the tools to bend and flare steel. It holds high hydraulic pressure and matches most factory routing. The trade-off versus copper-nickel: steel is stiffer and needs a bender for tight radii.

Working with it

Use a quality flaring tool and a tubing bender for clean results, and match the correct tube nuts and fittings. Not sure on flare type? See our bubble vs double flare guide. Browse all brake lines.

PVF-Coated Steel Brake Line FAQ

What is PVF-coated steel line?+
It is steel brake line with a poly-vinyl-fluoride coating that resists corrosion far better than bare or galvanized steel, while keeping an OE look.
How does it compare to copper-nickel?+
PVF-coated steel matches factory appearance and costs less; copper-nickel bends easier and never rusts. Both make solid repairs.
What size do I need?+
Most vehicles use 3/16 inch; some runs use 1/4 inch. Match your existing line and tube nut.

From the Knowledge Garage